 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MITSUBISHI IGBT MODULES CM150DU-24F HIGH POWER SWITCHING USE CM150DU-24F IC ................................................................... 150A VCES ......................................................... 1200V Insulated Type 2-elements in a pack APPLICATION General purpose inverters & Servo controls, etc OUTLINE DRAWING & CIRCUIT DIAGRAM Dimensions in mm 108 93 0.25 14 14 Tc measured point 14 RTC E2 G2 6 C2E1 0.25 E2 RTC C1 G1 E1 6 48 CM CIRCUIT DIAGRAM C2E1 E2 C1 25 3-M6 NUTS 4-6. 5 MOUNTING HOLES 25 21.5 2.5 4 18 7 18 7 18 2.8 7.5 8.5 0.5 0.5 0.5 0.5 29 +1.0 -0.5 22 LABEL 4 Aug. 1999 G1 E1 15 62 E2 G2 MITSUBISHI IGBT MODULES CM150DU-24F HIGH POWER SWITCHING USE MAXIMUM RATINGS (Tj = 25C) Symbol VCES VGES IC ICM IE (Note 1) IEM (Note 1) PC (Note 3) Tj Tstg Viso -- -- Parameter Collector-emitter voltage Gate-emitter voltage Collector current Emitter current Maximum collector dissipation Junction temperature Storage temperature Isolation voltage Torque strength Weight G-E Short C-E Short TC = 25C Pulse TC = 25C Pulse TC = 25C Conditions Ratings 1200 20 150 300 150 300 600 -40 ~ +150 -40 ~ +125 2500 3.5 ~ 4.5 3.5 ~ 4.5 400 Unit V V A A W C C V N*m N*m g (Note 2) (Note 2) Main terminal to base plate, AC 1 min. Main Terminal M6 Mounting holes M6 Typical value ELECTRICAL CHARACTERISTICS (Tj = 25C) Symbol ICES VGE(th) IGES VCE(sat) Cies Coes Cres QG td(on) tr td(off) tf trr (Note 1) Qrr (Note 1) VEC(Note 1) Rth(j-c)Q Rth(j-c)R Rth(c-f) Rth(j-c')Q RG Parameter Collector cutoff current Gate-emitter threshold voltage Gate leakage current Collector-emitter saturation voltage Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time Reverse recovery time Reverse recovery charge Emitter-collector voltage Thermal resistance*1 Test conditions VCE = VCES, VGE = 0V IC = 15mA, VCE = 10V VGE = VCES, VCE = 0V Tj = 25C IC = 150A, VGE = 15V Tj = 125C VCE = 10V VGE = 0V VCC = 600V, IC = 150A, VGE = 15V VCC = 600V, IC = 150A VGE1 = VGE2 = 15V RG = 2.1, Inductive load switching operation IE = 150A IE = 150A, VGE = 0V IGBT part (1/2 module) FWDi part (1/2 module) Case to fin, Thermal compoundapplied*2 (1/2 module) Tc measured point is just under the chips Min. -- 5 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 2.1 Limits Typ. -- 6 -- 1.8 1.9 -- -- -- 1650 -- -- -- -- -- 6.0 -- -- -- 0.04 -- -- Max. 1 7 20 2.4 -- 59 2.6 1.5 -- 150 80 450 300 150 -- 3.2 0.21 0.24 -- 0.13V3 21 Unit mA V A V nF nC ns ns C V C/W Contact thermal resistance Thermal resistance External gate resistance Note 1. IE, VEC, trr, Qrr, die/dt represent characteristics of the anti-parallel, emitter to collector free-wheel diode. (FWDi). 2. Pulse width and repetition rate should be such that the device junction temp. (Tj) does not exceed Tjmax rating. 3. Junction temperature (Tj) should not increase beyond 150C. 4. Pulse width and repetition rate should be such as to cause negligible temperature rise. *1 : Tc measured point is indicated in OUTLINE DRAWING. *2 : Typical value is measured by using Shin-etsu Silicone "G-746". *3 : If you use this value, Rth(f-a) should be measured just under the chips. Aug. 1999 MITSUBISHI IGBT MODULES CM150DU-24F HIGH POWER SWITCHING USE PERFORMANCE CURVES OUTPUT CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR CURRENT IC (A) 250 200 150 Tj = 25C VGE = 20V 15 11 10 9.5 COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) 3.5 4 300 3 VGE = 15V Tj = 25C 2.5 Tj = 125C 2 1.5 1 0.5 0 9 8.5 100 50 0 8 0 0.5 1 1.5 2 2.5 3 0 100 200 300 COLLECTOR-EMITTER VOLTAGE VCE (V) COLLECTOR CURRENT IC (A) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) 103 7 5 3 2 COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) 5 Tj = 25C Tj = 25C 4 3 IC = 300A 2 IC = 150A IC = 60A EMITTER CURRENT IE (A) 102 7 5 3 2 1 0 6 8 10 12 14 16 18 20 101 0.5 1 1.5 2 2.5 3 3.5 GATE-EMITTER VOLTAGE VGE (V) EMITTER-COLLECTOR VOLTAGE VEC (V) CAPACITANCE-VCE CHARACTERISTICS (TYPICAL) 102 103 7 5 3 2 HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) tf td(off) CAPACITANCE Cies, Coes, Cres (nF) 7 5 SWITCHING TIMES (ns) 3 2 Cies 101 7 5 3 2 102 7 5 3 2 td(on) tr Conditions: VCC = 600V VGE = 15V RG = 2.1 Tj = 125C Inductive load 2 3 5 7 102 2 3 5 7 103 100 7 5 3 2 Coes Cres 101 7 5 3 2 VGE = 0V 10-1 -1 10 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102 COLLECTOR-EMITTER VOLTAGE VCE (V) 100 1 10 COLLECTOR CURRENT IC (A) Aug. 1999 MITSUBISHI IGBT MODULES CM150DU-24F HIGH POWER SWITCHING USE REVERSE RECOVERY CHARACTERISTICS OF FREE-WHEEL DIODE (TYPICAL) REVERSE RECOVERY TIME trr (ns) REVERSE RECOVERY CURRENT lrr (A) NORMALIZED TRANSIENT THERMAL IMPEDANCE Zth (j-c) (C/W) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT part & FWDi part) 10-3 2 3 5 710-2 2 3 5 710-1 2 3 5 7 100 2 3 5 7 101 101 7 IGBT part: 5 Per unit base = Rth(j-c) = 0.21C/W 3 FWDi part: 2 Per unit base = Rth(j-c) = 0.24C/W 100 7 5 3 2 7 5 3 2 7 5 3 2 3 2 103 7 5 3 2 Irr 102 7 5 3 2 trr Conditions: VCC = 600V VGE = 15V RG = 2.1 Tj = 25C Inductive load 2 3 5 7 102 2 3 5 7 103 10-1 10-1 7 5 3 2 7 5 3 2 10-2 Single Pulse TC = 25C 10-2 101 1 10 10-3 10-3 10-5 2 3 5 710-4 2 3 5 7 10-3 TMIE (s) EMITTER CURRENT IE (A) GATE CHARGE CHARACTERISTICS (TYPICAL) 20 GATE-EMITTER VOLTAGE VGE (V) 18 16 14 12 10 8 6 4 2 0 0 IC = 150A VCC = 400V VCC = 600V 500 1000 1500 2000 2500 GATE CHARGE QG (nC) Aug. 1999 |
Price & Availability of CM150DU-24F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |